Root element is missing in any communication

R Net Communication configuration file may corrupt due to HDD issues or System may Suddenly down. while execute R Net Communication 

Click Here

Pamphlet for Interest and Maturity Value in India Post

Click here

SSA Dataentry process (by manraj)

Click here

UPDATE PENDING FORM ERROR IN SANCHAY POST 7.5

CLICK HERE

R NET FINA L SOLUTION FOR APS WEF 01 MAY 2015

CLICK HERE

ONLY FOR UPDATE OFFICE MASTER

RD DEFULAT SOLUTION FOR APS AFTER 15TH

CLICK HERE

Sanchay post passbook printer setting

SANCHAYPOST PASSBOOK PRINTER INSTALLATION & CONFIGURATION
PassBook - Printer Settings
1. Press station 1 + local +station2 & ON the printer (30sec)& insert the paper.
2. it shows station1=continue,station2=skip,local=config
3. Press local, it shows Menu : config
4.. Press station1 to continue until the printer name display as OLEVETTI
5. Press station2, the display changes to IBM
6. continue press station1 button until it displays save changes to Y
7. switch off the printer and swith on
Add New PASSBOOK PRINTER(It is for COM1 / Serial Port)
Start -> Setting -> printer -> Add Priner -> next -> Local Printer -> Next -> Select COM1 - Serial port -> Manufacturer ( IBM) -> Printers ( IBM Pro Printer 1 or 2) Give Name as ( PASSBOOK PRINTER) -> Next -> Next -> Finsih
* for Vista OS : Select Gereric -> 9 Pin Compatible Wide
Papper Settings:
Printer and Fax (Inside the Window) Right Click in the Blank space -> Server Properties -> Tick on the Create New Form -> Form Name ( give name as "PASSBOOK" ) -> Measurement ( in Inch)Width: 8.20 Left : 0.20 Top : 0.70Hight : 5.80 Right: 0.00 Bottom : 0.20
Save
Right Click Installed PASSBOOK PRINTER-> Properties -> 1. Devise Setting -> Select PASSBOOK and Apply2. Devise Setting -> Printing Preferences -> Advanced -> Select Paper size PASSBOOK3. Right Click -> properties -> Ports -> COM1 -> configure port -> Flow Control -> Xon / Xoff -> Apply -> OK
Set as " PASSBOOK PRINTER " as DefaultTry to Print SB Passbook Best

INVALID AADHAR ID ERROR IN SANCHAY POST 7.5

Click Here

Some important things about r net communication problems

Some important  things  for r net communication 

If r net communication  is runing but files not transmitted.

First check it

Do the following steps to rectify this problem
1. Go to the folder C:\windows\System32\drivers\etc ( if you have installed windows on D partition  then the path will be like D:\windows\System32\drivers\etc)
2. Open the file “Hosts” file using notepad
3. There will be an entry like the following inside the hosts file
127.0.0.1       localhost
Delete  all rows below this address

Secondly  check it

Go to the folder c:\program  files\r net communication \TXD (open it there is one another foder name txd1, and other files check there are one notpad file delete  the notpad file and run r net communication  again) and check the notpad file in txd1 folder.

From
WO Manraj Singh
Sys admin